Turbo effect | TurboCollector by MuoviTech

MANY BENEFITS OF TURBOCOLLECTOR

TURBULENT FLOWS AT SIGNIFICANTLY LOWER FLOW RATES

Turbulent flow increases the heat transfer to the collector fluid. With the TurboCollector, turbulent flow is induced at 22% lower flow rates than a conventional collector (1,800 Reynolds vs 2,300 for conventional collectors)

UP TO 11% INCREASE IN COP

Simulations show the TurboCollector reduces the convective resistance with up to 80%, increasing the collector fluid temperature and COP of the heat pump

ELECTRICITY SAVINGS, YEAR AFTER YEAR

During 50+ years of collector lifetime, the TurboCollector will continuously reduce electricity consumption, saving money and CO2

Product sheet TurboCollector
Scientific studie TurboCollector

CERTIFIED PRODUCTS

The TurboCollector comes with all relevant approvals, depending on your local market (P-marking and SKZ)

AVAILABLE IN ALL RELEVANT DIMENSIONS AND PRESSURE CLASSES

Single or double collectors, 25mm, 32mm, 40mm, 45mm, 50mm and 55mm. Also available in MuoviTech's patent pending elliptical turbo design: MuoviEllipse

MAXIMISES THE HEAT TRANSFER

Muovitech's fins with alternating pattern maximises the heat transfer by initiating turbulent flows at lower flow rates than conventional collectors

SEE THE FULL MOVIE - Turn up the volume

MUOVITECH'S PATENTED FIN DESIGN IS OPTIMISED FOR IMPROVING HEAT TRANSFER AND GEOTHERMAL SYSTEM EFFICIENCY

Clockwise and counterclockwise rotation

Independent research shows that MuoviTech's unique and patented fin design with alternating fin directions is creating the most optimal heat transfer.

Up to 600% increase in convective heat transfer

There is a negligible pressure drop difference between the TurboCollector and laminar probes for flow rates outside of Reynolds numbers 1800 to 2300.

Study made in cooperation with Chalmers University in Sweden

The study concludes that MuoviTech's Turbo Collector creates up to 600% increase in convective heat transfer.
TO THE STUDY

PRODUCT INFORMATION FOR TURBOCOLLECTOR®

TurboCollector®

Sonde met een hogere opbrengst
Voor verticaal en horizontaal gebruik

BETERE PRESTATIE
TurboCollector is een gepatenteerde sonde ten opzichte van een traditionele sonde, met duidelijk verbeterde eigenschappen. Dit komt door een meer turbulente stroming. Metingen hebben aangetoond dat de TurboCollector een tot 33% lagere boorweerstand heeft dan gelijke metingen met een gladde sonde.

LEES MEER: 3 onafhankelijke tests

PRODUCT INFORMATIE
Doorsnedes: 25mm, 32mm, 40mm.
Lengte: 50-500m.
Drukklasse: PN10 SDR17, PN12.5 SDR13.6 and PN16 SDR11.
Materiaal: PE100.

Voorzien van u-bocht en geïntegreerd gewicht. Extra zakgewichten (in diverse gradaties) ook mogelijk. De lengte is aangepast voor optimaal transport en makkelijke installatie.

PRODUCTIE
De buizen worden geproduceerd volgens onze hoge kwaliteitsstandaard.